Effective Audio Slipstream Plug & Play Products
In this section, our offered our Plug and products are listed. Effective Audio Adapters for customer Trials are availiable. Contact me to arrange for delivery.
Speaker Adapters
These are meant to be connected to be connected to your current speaker cable, near your speaker side.
| Quantam Speaker Adaptors | Price (SGD) |
|
|
| Set of 2 | 430 |
| Uses the large Quantum purifiers from Bybee Technologies. You can get a pair, in which case they should be connected to the positive terminal of your speaker. For best results, 4 are needed, for BOTH the positive and negative terminals. | |
RCA Adapters
These are meant to be connected to your interconnects, near the destination of your interconnect. For example, from your source to amp/preamp, then these are to be installed near your amp/preamp side.
| RCA Adaptors | Price (SGD) |
|
|
| Deluxe - Set of 2 | 430 |
| Ultimate - Set of 2 | 750 |
| Uses the same Bybee Slipstream purifiers as above. The Deluxe version has a slipstream purifier on the signal pin and silver wire as the ground connection. The Ultimate version has a slipstream purifier on BOTH the signal AND ground connection. The connectors used are DH Labs Pure Copper locking RCA plugs and sockets. Excellent results also for digital audio data transmission (SPDIF from your DVD to your processor). | |
Balance Adapters
These are meant to be connected to your interconnects, near the destination of your interconnect. For example, from your source to amp/preamp, then these are to be installed near your amp/preamp side.
If you have a special request for a single-ended to balanced adapter using slipstream purifiers, I will be able to wire up for you. Please check with me for the cost.
| EA Slipstream XLR Adapters | Price (SGD) |
|
|
| Deluxe - Set of 2 | 750 |
| Ultimate - Set of 2 | 1050 |
| Uses the same Bybee Slipstream purifiers as above. The Deluxe version uses 2 purifiers on the positive and negative signal (A total of 4 purifiers used for a pair). The Ultimate version uses 3 purifiers for the positive, negative signal and ground. Silver wire is used for all conductors. Uses DH Labs Copper XLR connectors. | |
Power Cord Adapters
The public utilities power grid is beset with noise of every kind. While power supply circuits within audio/video equipment—and elaborately designed and costly power cords and power conditioners--filter out much high-level noise, various types of low-level quantum noise have a free pass into the sensitive circuits of your audio or home theater system. This is because conventional power supply filtration techniques cannot treat the noise problem at the quantum mechanical level.
Bybee Technologies treats the problem at the quantum mechanical level, as demonstrated in the Bybee Slipstream Power Charger. You can purify your power delivery and appreciate subtle articulations in music and video that are typically masked by power grid grunge—and are not eliminated by even the most expensive conventional power cords and conditioners.
| EA Quantum Power Adapters | Price (SGD) |
|
|
| Standard | 250 |
| Deluxe | 430 |
| Ultimate | 600 |
| Uses the same quantum purifiers as above. 12-gauge high purify copper wire is used for fabrication. Wattgate IEC is used for the Female side and a very high quality connector is used for the IEC male side. Standard version uses 1 quantum purifier for the live wire. Deluxe version contains 2 quantum Purifiers, 1 for the for live and 1 for the neutral, while the ultimate version contains 3 quantum purifiers, 1 for live, 1 for neutral and 1 for earth. | |